• P Trouble Codes
• U Trouble Codes
• B Trouble Codes
• C Trouble Codes
• D Trouble Codes

P0134 Alfa Romeo Auto Trouble Code

P0134 Alfa Romeo the main thing to check is to verify the operation of the VCT solenoid. You're looking for a sticking or stuck VCt solenoid valve caused by contamination. Refer to vehicle specific repair manual to perform component tests for the VCT unit.

Remove the air filter box assembly so you can access the transmission range switch. Turn the key to the ON position, but do not start the vehicle. Move the shifter to the neutral position. Align the alignment holes between the switch and the shift lever. Insert a 5mm drill bit into the adjustment hole to verify the proper alignment for the neutral position.

P0134 Alfa Romeo Possible Solution:

Brake Switch Out of Self-Test Range Indicates that during Key On Engine Off (KOEO) Self-Test, BPP signal was high. Or during Key On Engine Running (KOER) Self -Test, the BPP signal did not cycle high and low. Open or short in (BPP) circuit Open or short in stoplamp circuits Damaged PCM Malfunction in module(s) connected to BPP circuit (Rear Electronic Module [REM] Windstar and LS6/LS8 and Lighting Control Module (LCM) Continental and Town Car) Damaged Brake Switch Misadjusted Brake Switch Check for proper function of stoplamps. Follow correct Self-Test procedures, refer to Section 2, Quick Test.

P0134 Alfa Romeo Description For All Models :

• Alfa Romeo 145
• Alfa Romeo 146
• Alfa Romeo 147
• Alfa Romeo 149
• Alfa Romeo 155
• Alfa Romeo 156
• Alfa Romeo 159
• Alfa Romeo 1600
• Alfa Romeo 164
• Alfa Romeo 166
• Alfa Romeo 175
• Alfa Romeo 1750
• Alfa Romeo 179
• Alfa Romeo 1900
• Alfa Romeo 20
• Alfa Romeo 2000
• Alfa Romeo 22
• Alfa Romeo 2300
• Alfa Romeo 2600
• Alfa Romeo 2900
• Alfa Romeo 33
• Alfa Romeo 4c
• Alfa Romeo 66
• Alfa Romeo 6c
• Alfa Romeo 75
• Alfa Romeo 8c
• Alfa Romeo 90
• Alfa Romeo Alfa
• Alfa Romeo Alfasud
• Alfa Romeo Alfetta
• Alfa Romeo Ar
• Alfa Romeo Arna
• Alfa Romeo Berlina
• Alfa Romeo Brera
• Alfa Romeo Concept
• Alfa Romeo Crosswagon
• Alfa Romeo Eagle
• Alfa Romeo Giulia
• Alfa Romeo Giulietta
• Alfa Romeo Gp
• Alfa Romeo Gp159
• Alfa Romeo Graduate
• Alfa Romeo Gt
• Alfa Romeo Gta
• Alfa Romeo Gtv
• Alfa Romeo Junior
• Alfa Romeo Long
• Alfa Romeo Mito
• Alfa Romeo Montreal
• Alfa Romeo Rl
• Alfa Romeo Rm
• Alfa Romeo Rz
• Alfa Romeo Spider
• Alfa Romeo Sportwagon
• Alfa Romeo Sprint
• Alfa Romeo Stelvio
• Alfa Romeo Sz

P0134 Alfa Romeo Trouble Repair : If your vehicle failed a P0134 Alfa Romeo test and the P0134 Alfa Romeo Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression. Use your OBD Express DIY to look at the oxygen sensor outputs, coolant temperature, airflow, calculated engine load, and inlet air temperature.

Code Search

Please fill the search bar to find Auto Trouble Code meaning.

P U B C	Example: 0120

All auto trouble codes with car brands.

About Us | Contact | Privacy

Copyright 2016 © - https://autotroublecode.com